DESCRIPTION
Prima JET UV inkjet inks is for use in piezoelectric, DOD print heads.
These inks provide high flexibility and elongation as well as excellent
adhesion with good chemical resistance to recommended substrate.
Primary uses of Prima JET UV inkjet inks is general substrate as like ABS,
and industrial label substrate where flexibility is of importance
Main advantage of Primajet UV
inkjet inks are as follows |
- UV curable printing inks without solvent.
- Formulated for use flexibility and elongation.
- Formulated high performance pigments for highest chroma
- Excellent light fastness(pigments are all 7-8 on Blue Wool scale)
* Accelerated weathering test by Xenon Arc Weather meter
* Can be 24 month exposure in outdoor
- Fast curing speed.
- Abrasion resistance. |
Product Range
| Primajet 153 |
Yellow |
Primajet 306
| Light Magenta |
| Primajet 456 |
Magenta |
Primajet 612
| Light Cyan |
| Primajet 765 |
Cyan |
Primajet 918
| Black |
| Primajet 1024 |
White |
Primajet 001
| Cleaning Solution |
| Primajet 100 |
Flush Solution |
| |
High-performance nano pigment dispersion used
These pigment in Primajet inks offer outstanding resistance to
light, weather, heat, chemical and solvent.
All of pigment in Primajet inks is from TRJ dispersion which particle size
is under 200 nanometer by JESCO dispersion technology.
Pigment dispersion for Primajet
▶ Measurement condition
- Temperature : 25 °C
- Diluent Name : MEK
- Refractive Index ; 1.38
- Viscosity : 0.4016 (cp)
- Scattering Intensity : 7899(cps)
Curing Parameters
Primajet UV inkjet inks are formulated to cure when exposed
to a focused , medium pressure mercury vapor lamp providing
225 – 300 mJ/cm² and 600W/cm².
The actual level of cure will depend on ink thickness , substrate ,
and UV curing lamps being used. Superior through cure may be
obtained by reducing the print speed to increase the overall UV dose.
The inks will undergo dark cure at room temperature or an optional
thermal post -cure at 200°C for 5 minutes or less may be required.
Further recommendation on obtaining best cure could be provided
depending on the end user application.
Viscosity Range( c p s )
Temp
(°C) |
153
YELLOW |
306
L . Magenta |
456
Magenta |
612
L . Cyan |
765
Cyan |
918
Black |
1024
White |
| 25 |
14.6 |
14.0
| 15.3 |
14.0 |
15.4 |
14.6
| 18.9 |
| 40 |
8.9 |
8.5 |
9.7 |
8.5 |
9.9 |
8.9 |
13.5 |
| 45 |
8.0 |
7.5
| 8.5 |
7.5 |
8.6 |
8.0 |
12.8 |
| 50 |
7.5 |
7.0 |
7.0 |
7.0 |
7.0 |
7.7 |
11.2 |
Measured by Brookfield DV-2+ / Spindle No. 18 / 120 rpm / 5 minutes
* Viscosity can be control by customers requirement.
Evaluated Print Head
- Konica 512 –New series
- Xaar 760 GS8
- Spectra Nova JA 256 / 80
- Galaxy JA 256 / 80
- Galaxy JA 256 / 30
- OTHERS .
Storage condition
This inks should always kept away from heat , sunlight , sparks.
And flames. Store inks and solution at 18 – 40°C at a humidity
from 20 – 50% in non-condensing environment.
The shelf life of this products is 12 months from the date of
manufacture when stored under prescribed conditions.
Ink Handling & Environmental information
Wear gloves and eye protection device when handling inks and
Consult Material Safety Data Sheet for further instruction and
Environmental information.
Disclaimer
The information and recommendations contained in this TDS as well as technical advice otherwise
given by representative of our company, whether verbally or in writing , are based on our present
knowledge and believed to be accurate. However , no guarantee regarding their accuracy is given
as we cannot cover or anticipate every possible application of our products and because manufacturing
methods, printing stocks and other material vary.
For the same reason our products are sold without warranty and on condition that users shall make their
own test to satisfy themselves that they will meet fully their particular requirements.
Our policy of continuous product improvement might make some of the information contained in this PDS
Out of date and users are requested to ensure that they follow current recommendations.
Primajet
